Metal guitarists! If you’re looking for a new pedal that’s just right, then look no further. The flanger is just the thing to spice up your sound. The best flanger pedal for metal is what you are looking for and these are what we would recommend.
Quick Links To Our Best Flanger Pedals For Metal Recommendations
- Electro-Harmonix Deluxe Electric Mistress XO – OUR TOP CHOICE!
- MXR EVH117 Flanger
- TC Electronic Vortex Flanger
- MXR M177R Flanger
- Boss BF-3 Flanger
Our Metal Guitar Flanger Pedals Reviews
Electro-Harmonix Deluxe Electric Mistress XO
The Deluxe Electric Mistress XO is the “tweaked” edition of our popular analog flanger pedal. This new version features a vintage lens for a more organic sound, and also includes an external modulation input, offering endless flanging possibilities. Now you can produce a unique flanging tone using two external modulation sources at the same time.
A switch on the outside jacks allows you to choose between three modes: “Feedback” (the original circuit), “Saturated” (an even more saturated, shimmering tonal experience) or “Stereo” (a phase-shifting effect that makes guitars in mono seem like they’re coming from two different locations). The “Feedback” mode gives you a flanging sound that is similar to what was used on “Stairway to Heaven.” This is one of the modes that people often associate with a flanger. The “Saturated” mode reproduces the sound of a tape echo.
The “Stereo” mode replicates an interesting type of flanging effect used in stereo recording. [sigh] Old-school tape flangers are challenging to recreate, and the Deluxe Electric Mistress XO does it exceedingly well.
MXR EVH117 Flanger
The MXR EVH117 Flanger is an analog flanger that has been crafted to replicate the sound of two delay lines that are offset by one-half of a cycle. The effect, in this case, is a downward shift in pitch that also adds a slight swelling at the beginning of each brightened tone. This pedal is not modeled after any one specific flanger, but instead is designed to produce a wide range of organic-sounding flange effects.
That said, this pedal has three knobs that allow you to select the amount of this effect, control its output volume and store settings in memory via a switch on the back. The “intensity” knob adjusts the amount of control that the flanger has over the instrument’s signal. This is the knob that allows you to adjust how tight and choppy the tone is, as well as add subtle chorusing effects.
The “volume” knob controls the output volume of the pedal. Finally, there is a switch on this pedal that allows you to store one effect setting in memory for later use. This is useful for creating preset tones for a song, then later recalling those settings to use during your show.
TC Electronic Vortex Flanger
The Vortex Flanger from TC Electronic is in its own class of flangers because of the way it adds or subtracts frequencies during the flanging process. The pedal includes two independent channels, with a footswitch that allows you to independently control each channel.
The settings on these channels can be saved for reuse, and a bypass switch is used to switch between them. To set your desired flanging effect, simply set the controls on one of the two channels as needed, then hit the footswitch and set the other channel to “tune” mode.
This will shift the output to match the new frequency with the frequency that you just set. From there, use the control on the “chorus” channel to adjust how much it’s adding or subtracting to each flange. The pedal also includes a jack for an expression pedal that allows you to further customize your flanging effects. In this case, it’s used to control the amount of pitch shifting from one channel and then back down into a reverse flange.
MXR M177R Flanger
The MXR M177R is an analog flanger based on the circuit used in the classic Deluxe Electric Mistress flanger. The M177R circuit is tuned to a vintage, bright tone that’s reminiscent of flangers from the 1970s and ’80s. It has two footswitchable channels ( engage and feedback ) that can be controlled in tandem, which adds an element of stereo depth to the sound.
The “flange” control adjusts the amount of modulation applied by one channel when engaged. This control can be set to “on” or “off,” which gives you the flexibility to completely dial in a variety of warm, rich flanging sounds. An optional tone control adds some high-frequency clarity to your sound.
Boss BF-3 Flanger
The Boss BF-3 Flanger is a simple, reliable and inexpensive choice for guitar players and home recording enthusiasts looking to add a little vintage-sounding flange to their sound. The BF-3 has two footswitchable channels ( engage and feedback ) that can be controlled in tandem, which adds an element of stereo depth to the sound.
The “flange” control adjusts the amount of modulation applied by one channel when engaged. This control can be set to “on” or “off,” which gives you the flexibility to completely dial in a variety of warm, rich flanging sounds. An optional tone control adds some high-frequency clarity to your sound. This is a great choice if you’re looking for a classic, basic flanger that’s been around for most of the past decade.
Our Conclusion On These Top Metal Guitar Flangers
We hope that this article has been helpful to you. As you can see, there are quite a few different flangers out there that can be used to add some flair and variety to your tone. As we went over in this review, most modern flangers include controls for rate, depth, feedback and intensity. Additionally, some pedals include knobs to help you fine-tune the sound of your flange.